Heavy Duty Lathe with Swing over cross slide 615mm-1,015mm & Swing over bed 880mm-1,275mm and distance between center up to 12,000mm
Item PA-35 PA-40 PA-45 PA-50 Swing Over Bed 880mm 1,010mm 1,135mm 1,275mm Swing Over Cross Slide 615mm 745mm 875mm 1,015mm Swing Over Bed Gap 1,340mm 1,470mm 1,600mm 1,740mm Distance Between Center 1,500mm – 12,000mm 1,500mm – 12,000mm 1,500mm – 12,000mm 1,500mm – 12,000mm Bed Width 560mm 560mm 560mm 560mm Spindle Nose A2-11 ~ A2-32 A2-11 ~ A2-32 A2-11 ~ A2-32 A2-11 ~ A2-32 Spindle Bore 6-14” 6-14” 6-18” 6-22” Spindle Motor Standard 20HP, Option 25HP – 50HP Standard 20HP, Option 25HP – 50HP Standard 20HP, Option 25HP – 50HP Standard 20HP, Option 25HP – 50HP
- One piece bed, floor type casting.
- 2 shear bed way with extra way supporting the apron.
- All ways are hardened and ground.
- Alloy steel spindle with opposed taper roller bearings.
- Hardened and ground gears, shafts and cross slide ways.
- Electromagnetic spindle brake.
- 18-speed geared headstock.
- 6-way rapid traverse and power feed to top slide.
- Totally enclosed universal inch / metric gear box.
- Carriage position device.
- Dual voltage spindle motor, 20 to 50 HP.
- Pressurized one shot lube system for cross slide and carriage.
- Thread chasing dial
- 2-speed tailstock quill (manual)
- 1 dead center, MT #6
- Coolant pump
- Work lamp
- Follow type splash guard
- One piece stainless steel lead screw cover
- Water and oil collect plate under apron
- Rear side chip and water collect plate