Trusted Heavy Duty Flat Bed Lathe with Swing over bed between 880- 1275mm and up to 12,000mm between centers
Item BN-45 BN-50 BN-60 Swing Over Bed 1,155mm 1,275mm 1,525mm Swing Over Cross Slide 720mm 840mm 1,090mm Distance Between Center 1,500mm – 12,000mm 1,500mm – 12,000mm 1,500mm – 12,000mm Spindle Nose A2-11 ~ A2-40 A2-11 ~ A2-40 A2-11 ~ A2-40 Bed Width 715mm 715mm 715mm Spindle Bore 6-30” 6-30” 6-30” Spindle Motor Standard 30HP, Option 40HP, 50HP Standard 30HP, Option 40HP, 50HP Standard 30HP, Option 40HP, 50HP Controller FANUC / FAGOR / SIEMENS FANUC / FAGOR / SIEMENS FANUC / FAGOR / SIEMENS
- One piece bed, floor type casting.
- Alloy steel spindle with opposed taper roller bearings.
- All gears in the headstock are hardened and precisely ground.
- Automatic ranges of spindle speed through pneumatic gear shift.
- Spindle speed ranges are automatically changed by M code.
- Infinitely variable speed are commanded by S code.
- Tool change are commanded by T code.
- Auto lubrication system is equipped for headstock, carriage, and cross-slide.
- Precision tapered roller bearings are equipped on the spindle and the quill.
- The quill is heat treated and precisely ground.
- Internal taper of quill to suit MT#6 dead center or live centre.
- Turcite B anti friction material is applied on cross slide and carriage for reduce friction.
- X and Z axis ballscrews are protected by covers to prevent ingress of swarf / chips and coolant.
- Hydraulic H4 turret.
- Rotating tailstock quill with 235mm diameter.
- Motorized tailstock body and quill movement.
- FANUC 0i-TF series complete with manual guide and thread repair.
- Front and rear chip conveyor.
ARE YOU INTERESTED IN THIS TECHNOLOGY?
Leave us a message and we will respond to you as soon as possible!