-
XE Type: Gundrill rotates/ workpiece fixed on the fixture
Specification XE-500 (CNC) XE-1000 (CNC) Drill Capacity Hole Diameter Ø3~Ø12 mm, Ø10~Ø25 mm (Option) Ø3~Ø12 mm, Ø10~Ø25 mm (Option) Max. Depth (Z) 500 mm 1000 mm No. of Spindle 1~4 spindles 1~4 spindles Power Spindle Motor 3~5 HP (with inverter) 3~5 HP (with inverter) Drill Spindle Feed (Z) Servo motor 850~1300W / 5.39~8.34 N.M.. Servo motor 850~1300W / 5.39~8.34 N.M.. High Pressure Motor 3~7.5 HP 3~7.5 HP Speed Max. Spindle Speed 6000 rpm 6000 rpm Drill Speed 10~ 150 mm / min 10~ 150 mm / min Rapid 5000 mm / min 5000 mm / min Ball Screw for Feeds Spindle infeed (Z) Ø40 x P10 x C3 Ø40 x P10 x C3 High Pressure
Pump (Every Spindle One Set)Pump Output 40~150 Liter / min 40~150 Liter / min Max. Pressure 100~150 kgs / cm² 100~150 kgs / cm² Coolant Tank 800~1600 Liter 800~1600 Liter Floor Space 3000 x 3300 mm 3000 x 4300 mm Net Weight 2100 kgs 2600 kgs Standard Accessories 1. High pressure coolant pump
2. Automatic lubricator
3. Tool box with toolsOptional Accessories 1. Magnetic separator + Paper filter unit
2. Chip conveyor
3. Coolant cooler
4. Gundrill grinder
5. Special clamping fixture for special purpose
6. Special designed auto-loading & unloading device
7. CE Certificate-
- XE type machines are suitable to produce small & medium components shafts, mandrels.
- Servo motor and Ball screw are used for the feed mechanism to insure smooth and convenient for feed rate adjust.
- Hardened and ground Main slide ways to hardness HRC 60. The opposite ways and gibs are all Turcite-B plated with hand scraped bearing surface.
- Suspending type operate panel and MPG(Hand wheel) for easier setting and operation.
- Automatic lubrication pump is provided as standard accessory to ensure all the bearing surface and screws are well lubricated.
- The machine could be controlled by CNC or conversational model with PLC interface.
- CE mark are available for special required.