![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-1.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-2.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-3.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-4.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-5.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-6.jpg)
![](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-7.jpg)
![Wasino SE52-N2 NC Surface Grinder 1](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-1.jpg)
![Wasino SE52-N2 NC Surface Grinder 2](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-2.jpg)
![Wasino SE52-N2 NC Surface Grinder 3](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-3.jpg)
![Wasino SE52-N2 NC Surface Grinder 4](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-4.jpg)
![Wasino SE52-N2 NC Surface Grinder 5](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-5.jpg)
![Wasino SE52-N2 NC Surface Grinder 6](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-6.jpg)
![Wasino SE52-N2 NC Surface Grinder 7](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-SE52-N2-NC-Surface-Grinder-7.jpg)
Condition
- Year of Manufacture : 1996
- On power at factory and maintained well by Flexmech
- Last accuracy check & full maintenance in 2014
- Rarely used for production
Technical Data
Hydraulic Type Fully Automatic Type
Table Size 580mm x 200mm
Distance from the Table to Grinding Wheel 400mm
Chuck Size 500mm x 200mm x 70mm
Table Stroke Left to Right 600mm
Reciprocating Speed 1 to 25 m / min
Maximum Longitudinal Stroke 230mm
Front-to-Rear Intermittent Feed Amount (Stepless) 0.5 to 20 mm
Front-to-Back Continuous Feed Rate 0.1 to 0.6 m / min
Vertical Wheel Head Downfeed 0.002 to 0.03 mm
Up / Down Fine Movement Feed 0.002 – 0.03 mm
Upper / Lower Manual Handle (1 division / 1 rotation) 0.005 / 1 mm
Up / Down Fast Forward Speed 430 mm / min
Grinding Wheel Dimensions φ205 x 6.4 – 25 x φ 50.8
Rotational Speed Inverter Control
Spindle Motor 2.2 kW
Hydraulic Pump 0.75kw 4P
CNC Controller Fanuc 20i-F
Accessories
- Oil Filtration System
- Magnetic Chuck
- Rapid Reciprocation Attachment : WASINO ST-100