![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic1.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic2.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic3.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic4.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic5.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic6.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic7.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic8.jpg)
![Wasino GLS-135AS Optical Profile Grinder](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic9.jpg)
![Wasino GLS-135AS Pic1](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic1.jpg)
![Wasino GLS-135AS Pic2](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic2.jpg)
![Wasino GLS-135AS Pic3](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic3.jpg)
![Wasino GLS-135AS Pic4](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic4.jpg)
![Wasino GLS-135AS Pic5](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic5.jpg)
![Wasino GLS-135AS Pic6](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic6.jpg)
![Wasino GLS-135AS Pic7](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic7.jpg)
![Wasino GLS-135AS Pic8](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic8.jpg)
![Wasino GLS-135AS Pic9](http://www.flexmech.com/site/wp-content/uploads/2014/10/Wasino-GLS-135AS-Pic9.jpg)
Condition
- Able to produce 2D profile toolings with high precision
- Vertical Stroke bearing is not in good condition, so unable to produce Semiconductor Carbide Punches unless machine is repaired.
- Location : Malaysia
Technical Data
Table Data
Table Dimension 400 X 225 mm
Traverse Feed 25 mm
Cross Feed 100 mm
Wheel Head Data
Reciprocating Slide Stroke 0 – 155 mm
Reciprocating Speed 30 – 400 min-1
Traverse Feed 200 mm
Cross Feed 150 mm
Other Data
Projector Magnification 50X, 20X
Max. Spindle Speed 3,000 RPM
Spindle Motor 1.5 -4 kW
Controller FANUC 20i-F
Overall Dimensions Machine
Length 3300 mm
Width 2500 mm
Machine’s weight about 3300 kg
Year of manufacture 1990
Accessories
- 3,000 rpm Spindle
- Medium Flange 22.23 3 pcs
- Original ATOMIC Dust Collector 1 pc
- Daikin Chiller 1 pc
- Sony DRO (1 Axis) 1 pc